Logo Search packages:      
Sourcecode: virtualbox-ose version File versions  Download package

scsi.h

Go to the documentation of this file.
/** @file
 * VirtualBox - SCSI declarations.
 */

/*
 * Copyright (C) 2006-2007 Sun Microsystems, Inc.
 *
 * This file is part of VirtualBox Open Source Edition (OSE), as
 * available from http://www.virtualbox.org. This file is free software;
 * you can redistribute it and/or modify it under the terms of the GNU
 * General Public License (GPL) as published by the Free Software
 * Foundation, in version 2 as it comes in the "COPYING" file of the
 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
 *
 * The contents of this file may alternatively be used under the terms
 * of the Common Development and Distribution License Version 1.0
 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
 * VirtualBox OSE distribution, in which case the provisions of the
 * CDDL are applicable instead of those of the GPL.
 *
 * You may elect to license modified versions of this file under the
 * terms and conditions of either the GPL or the CDDL or both.
 *
 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
 * Clara, CA 95054 USA or visit http://www.sun.com if you need
 * additional information or have any questions.
 */

#ifndef ___VBox_scsi_h
#define ___VBox_scsi_h

#include <iprt/assert.h>

#define SCSI_MAX_BUFFER_SIZE (100 * _1K)


/**
 * SCSI command opcode identifiers.
 *
 * SCSI-3, so far for CD/DVD Logical Units, from Table 49 of the MMC-3 draft standard.
 */
00043 typedef enum SCSICMD
{
    SCSI_BLANK                          = 0xa1,
    SCSI_CLOSE_TRACK_SESSION            = 0x5b,
    SCSI_ERASE_10                       = 0x2c,
    SCSI_FORMAT_UNIT                    = 0x04,
    SCSI_GET_CONFIGURATION              = 0x46,
    SCSI_GET_EVENT_STATUS_NOTIFICATION  = 0x4a,
    SCSI_GET_PERFORMANCE                = 0xac,
    /** Inquiry command. */
00053     SCSI_INQUIRY                        = 0x12,
    SCSI_LOAD_UNLOAD_MEDIUM             = 0xa6,
    SCSI_MECHANISM_STATUS               = 0xbd,
    SCSI_MODE_SELECT_10                 = 0x55,
    SCSI_MODE_SENSE_10                  = 0x5a,
    SCSI_PAUSE_RESUME                   = 0x4b,
    SCSI_PLAY_AUDIO_10                  = 0x45,
    SCSI_PLAY_AUDIO_12                  = 0xa5,
    SCSI_PLAY_AUDIO_MSF                 = 0x47,
    SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL   = 0x1e,
    /** Read(10) command. */
00064     SCSI_READ_10                        = 0x28,
    SCSI_READ_12                        = 0xa8,
    SCSI_READ_BUFFER                    = 0x3c,
    SCSI_READ_BUFFER_CAPACITY           = 0x5c,
    /** Read Capacity(6) command. */
00069     SCSI_READ_CAPACITY                  = 0x25,
    SCSI_READ_CD                        = 0xbe,
    SCSI_READ_CD_MSF                    = 0xb9,
    SCSI_READ_DISC_INFORMATION          = 0x51,
    SCSI_READ_DVD_STRUCTURE             = 0xad,
    SCSI_READ_FORMAT_CAPACITIES         = 0x23,
    SCSI_READ_SUBCHANNEL                = 0x42,
    SCSI_READ_TOC_PMA_ATIP              = 0x43,
    SCSI_READ_TRACK_INFORMATION         = 0x52,
    SCSI_REPAIR_TRACK                   = 0x58,
    SCSI_REPORT_KEY                     = 0xa4,
    SCSI_REQUEST_SENSE                  = 0x03,
    SCSI_RESERVE_TRACK                  = 0x53,
    SCSI_SCAN                           = 0xba,
    SCSI_SEEK_10                        = 0x2b,
    SCSI_SEND_CUE_SHEET                 = 0x5d,
    SCSI_SEND_DVD_STRUCTURE             = 0xbf,
    SCSI_SEND_EVENT                     = 0xa2,
    SCSI_SEND_KEY                       = 0xa3,
    SCSI_SEND_OPC_INFORMATION           = 0x54,
    SCSI_SET_CD_SPEED                   = 0xbb,
    SCSI_SET_READ_AHEAD                 = 0xa7,
    SCSI_SET_STREAMING                  = 0xb6,
    SCSI_START_STOP_UNIT                = 0x1b,
    SCSI_STOP_PLAY_SCAN                 = 0x4e,
    /** Synchronize Cache command. */
00095     SCSI_SYNCHRONIZE_CACHE              = 0x35,
    SCSI_TEST_UNIT_READY                = 0x00,
    SCSI_VERIFY_10                      = 0x2f,
    /** Write(10) command. */
00099     SCSI_WRITE_10                       = 0x2a,
    SCSI_WRITE_12                       = 0xaa,
    SCSI_WRITE_AND_VERIFY_10            = 0x2e,
    SCSI_WRITE_BUFFER                   = 0x3b,

    /** Mode Sense(6) command */
00105     SCSI_MODE_SENSE_6                   = 0x1a,
    /** Report LUNs command. */
00107     SCSI_REPORT_LUNS                    = 0xa0,
    SCSI_REPORT_DENSITY                 = 0x44,
    /** Rezero Unit command. Obsolete for ages now, but used by cdrecord. */
00110     SCSI_REZERO_UNIT                    = 0x01,
    SCSI_SERVICE_ACTION_IN_16           = 0x9e,
    SCSI_READ_16                        = 0x88,
    SCSI_WRITE_16                       = 0x8a,
    SCSI_READ_6                         = 0x08,
    SCSI_WRITE_6                        = 0x0a
} SCSICMD;

/* Mode page codes for mode sense/select commands. */
#define SCSI_MODEPAGE_ERROR_RECOVERY   0x01
#define SCSI_MODEPAGE_WRITE_PARAMETER  0x05
#define SCSI_MODEPAGE_CD_STATUS        0x2a


/* Page control codes. */
#define SCSI_PAGECONTROL_CURRENT        0x00
#define SCSI_PAGECONTROL_CHANGEABLE     0x01
#define SCSI_PAGECONTROL_DEFAULT        0x02
#define SCSI_PAGECONTROL_SAVED          0x03


/* Status codes */
#define SCSI_STATUS_OK                          0x00
#define SCSI_STATUS_CHECK_CONDITION             0x02
#define SCSI_STATUS_CONDITION_MET               0x04
#define SCSI_STATUS_BUSY                        0x08
#define SCSI_STATUS_INTERMEDIATE                0x10
#define SCSI_STATUS_DATA_UNDEROVER_RUN          0x12
#define SCSI_STATUS_INTERMEDIATE_CONDITION_MET  0x14
#define SCSI_STATUS_RESERVATION_CONFLICT        0x18
#define SCSI_STATUS_COMMAND_TERMINATED          0x22
#define SCSI_STATUS_QUEUE_FULL                  0x28
#define SCSI_STATUS_ACA_ACTIVE                  0x30
#define SCSI_STATUS_TASK_ABORTED                0x40


/* Sense keys */
#define SCSI_SENSE_NONE             0
#define SCSI_SENSE_RECOVERED_ERROR  1
#define SCSI_SENSE_NOT_READY        2
#define SCSI_SENSE_MEDIUM_ERROR     3
#define SCSI_SENSE_HARDWARE_ERROR   4
#define SCSI_SENSE_ILLEGAL_REQUEST  5
#define SCSI_SENSE_UNIT_ATTENTION   6
#define SCSI_SENSE_DATA_PROTECT     7
#define SCSI_SENSE_BLANK_CHECK      8
#define SCSI_SENSE_VENDOR_SPECIFIC  9
#define SCSI_SENSE_COPY_ABORTED     10
#define SCSI_SENSE_ABORTED_COMMAND  11
#define SCSI_SENSE_VOLUME_OVERFLOW  13
#define SCSI_SENSE_MISCOMPARE       14


/* additional sense keys */
#define SCSI_ASC_NONE                               0x00
#define SCSI_ASC_READ_ERROR                         0x11
#define SCSI_ASC_ILLEGAL_OPCODE                     0x20
#define SCSI_ASC_LOGICAL_BLOCK_OOR                  0x21
#define SCSI_ASC_INV_FIELD_IN_CMD_PACKET            0x24
#define SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED            0x28
#define SCSI_ASC_MEDIUM_NOT_PRESENT                 0x3a
#define SCSI_ASC_SAVING_PARAMETERS_NOT_SUPPORTED    0x39
#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED         0x53
#define SCSI_ASC_LOGICAL_UNIT_DOES_NOT_RESPOND_TO_SELECTION 0x00

/** @name SCSI_INQUIRY
 * @{
 */
#pragma pack(1)
typedef struct SCSIINQUIRYCDB
{
    unsigned u8Cmd : 8;
    unsigned fEVPD : 1;
    unsigned u4Reserved : 4;
    unsigned u3LUN : 3;
    unsigned u8PageCode : 8;
    unsigned u8Reserved : 8;
    uint8_t cbAlloc;
    uint8_t u8Control;
} SCSIINQUIRYCDB;
#pragma pack()
AssertCompileSize(SCSIINQUIRYCDB, 6);
typedef SCSIINQUIRYCDB *PSCSIINQUIRYCDB;
typedef const SCSIINQUIRYCDB *PCSCSIINQUIRYCDB;

#pragma pack(1)
typedef struct SCSIINQUIRYDATA
{
    unsigned u5PeripheralDeviceType : 5;    /**< 0x00 / 00 */
    unsigned u3PeripheralQualifier : 3;
    unsigned u6DeviceTypeModifier : 7;      /**< 0x01 */
    unsigned fRMB : 1;
    unsigned u3AnsiVersion : 3;             /**< 0x02 */
    unsigned u3EcmaVersion : 3;
    unsigned u2IsoVersion : 2;
    unsigned u4ResponseDataFormat : 4;      /**< 0x03 */
    unsigned u2Reserved0 : 2;
    unsigned fTrmlOP : 1;
    unsigned fAEC : 1;
    unsigned cbAdditional : 8;              /**< 0x04 */
    unsigned u8Reserved1 : 8;               /**< 0x05 */
    unsigned u8Reserved2 : 8;               /**< 0x06 */
    unsigned fSftRe : 1;                    /**< 0x07 */
    unsigned fCmdQue : 1;
    unsigned fReserved3 : 1;
    unsigned fLinked : 1;
    unsigned fSync : 1;
    unsigned fWBus16 : 1;
    unsigned fWBus32 : 1;
    unsigned fRelAdr : 1;
    int8_t   achVendorId[8];                /**< 0x08 */
    int8_t   achProductId[16];              /**< 0x10 */
    int8_t   achProductLevel[4];            /**< 0x20 */
    uint8_t  abVendorSpecific[20];          /**< 0x24/36 - Optional it seems. */
    uint8_t  abReserved4[40];
    uint8_t  abVendorSpecificParameters[1]; /**< 0x60/96 - Variable size. */
} SCSIINQUIRYDATA;
#pragma pack()
AssertCompileSize(SCSIINQUIRYDATA, 97);
typedef SCSIINQUIRYDATA *PSCSIINQUIRYDATA;
typedef const SCSIINQUIRYDATA *PCSCSIINQUIRYDATA;

#define SCSI_INQUIRY_DATA_PERIPHERAL_QUALIFIER_CONNECTED                   0x00
#define SCSI_INQUIRY_DATA_PERIPHERAL_QUALIFIER_NOT_CONNECTED_BUT_SUPPORTED 0x01
#define SCSI_INQUIRY_DATA_PERIPHERAL_QUALIFIER_NOT_CONNECTED_NOT_SUPPORTED 0x03

#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_DIRECT_ACCESS     0x00
#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_SEQUENTIAL_ACCESS 0x01
#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_CD_DVD            0x05
#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_UNKNOWN           0x1f

/** @} */

#if defined(IN_RING3) && (defined(LOG_ENABLED) || defined(RT_STRICT))
const char * SCSICmdText(uint8_t uCmd);
const char * SCSISenseText(uint8_t uSense);
const char * SCSISenseExtText(uint8_t uASC, uint8_t uASCQ);
#endif

#endif

Generated by  Doxygen 1.6.0   Back to index